NMEA2000 Picoscope Kit

£1,000.00

This kit allows the analysis of the NMEA2000 CAN bus Physical Layer which is concerned with the electrical signals of CAN_H (Net-H) and CAN_L (Net-L). This is particularly useful because not all NMEA2000 devices will have the same quality of signal. This kit will help you find out which devices have bad quality electrical signals and therefore help find the location of faults.

The kit contains:

  • X-Analyser 3 Professional Software for PicoScope CAN
  • PicoScope 2206B USB oscilloscope and scope probes comes with PicoScope 6 Oscilloscope software
  • M12 to dual BNC cable to interface from the PicoScope to the NMEA2000 system.
  • Warwick Control carry bag.
  • USB stick with relevant software loaded.
  • User documentation

Picoscope 2206B 2 Channel 50MHz

Picoscope 2206B 2 Channel 50MHz – Normally supplied with CAN Scope Kit or the Marine NMEA2000 CAN Scope Kit but can be purchase separately.

 

Other PicoScope models can be purchased from Warwick Control. Please enquire to sales@warwickcontrol.com for more info.

X-Analyser 3 Professional (Multiple Channel)

X-Analyser 3 Professional (Multiple Channel) – This has all the features of the Standard with addition of interpretation of standard Higher Layer Protocols - J1939, NMEA2000 and CANopen. Comes with J1939 and NMEA2000 CAN data bases (dbc). The Professional is Multiple Channels (CAN and/or LIN) – dongled from 1 Kvaser interface serial number, any number of other interfaces can be connected. For feature comparison with other versions of X-Analyser 3, please see:

X Analyser  Features

Free Software Resources

M12 5P connector male to Overmold 2*BNC male connectors

WCT Kit Bag small laptop

Neoprene bag for carrying your portable tech

Category:

Description

This kit will help you find out which devices have bad quality electrical signals and therefore help find the location of faults.